1. Understand VMware NSX Fundamentals
1. Intro.mp4
2. SDDC Overview.mp4
3. NSX Benefits.mp4
4. Centralized Control Plane.mp4
5. Host Transport Node Components.mp4
6. Edge Transport Node Components.mp4
7. Validation.mp4
8. Validation 2.mp4
2. Deploy an NSX Mgmt. Cluster
1. Intro.mp4
2. Overview and Game Plan.mp4
3. Verify Infrastructure.mp4
4. Deploy the Initial NSX Manager.mp4
5. Verify and License the NSX Manager.mp4
6. Register vCenter with NSX Manager.mp4
7. Configure a Virtual IP and configure Anti-Affinity Rules.mp4
8. Validation.mp4
3. Deploy NSX Host Transport Nodes
1. Intro.mp4
2. Overview and Game Plan for NSX Host Transport Nodes.mp4
3. Verify Top of Rack (ToR) Infrastructure.mp4
4. Create IP Pools and Host Uplink Profiles.mp4
5. Create Transport Zone and VDS.mp4
6. Deploy NSX to A and B.mp4
7. Validation.mp4
4. Deploy NSX Overlay Segments
1. Intro.mp4
2. Verify existing Topology.mp4
3. Verify Uplink Profiles and Create a Game Plan.mp4
4. Create an Overlay Segment.mp4
5. Looking at Layer 2 Overlay Segment Using the NSX CLI.mp4
6. Connect VMs to an NSX Overlay Segment.mp4
7. Create a Second Segment.mp4
8. Validation.mp4
5. Deploy NSX Edge Node VMs
1. Intro .mp4
2. Edge Node Overview and Game Plan.mp4
3. Deploy the NSX Edge Transport Nodes.mp4
4. Verify the Edge Deployment and Cluster.mp4
5. When Edge Transport Nodes Are and Are Not Needed.mp4
6. Validation.mp4
6. Deploy an NSX T1 DR
1. Intro.mp4
2. Layer 3 IP Routing Overview.mp4
3. Tier 1 L3 Routing Using a Distributed Router (DR).mp4
4. NSX T1 DR Gateway Game Plan.mp4
5. Confirm Existing NSX Overlay Segments.mp4
6. Create a Tier-1 GW and Connect Segments.mp4
7. Confirming Distributed Router.mp4
8. Routing for VMs on a Single ESXi Host.mp4
9. Routing for VMs on 2 Different ESXi Hosts.mp4
10. Validation.mp4
7. Deploy an NSX Tier 0 DR
1. Intro.mp4
2. Tier 0 and Tier 1 Overview and Game Plan.mp4
3. Create Additional Tier-1 GW.mp4
4. Create the Tier-0.mp4
5. Advertise Routes From T1s.mp4
6. Verify Routing and Packet Flow Between VMs.mp4
7. Validation.mp4
8. Use NSX SR for External Connectivity
1. Intro.mp4
2. NSX External Connectivity Overview.mp4
3. Game Plan for External Network Access.mp4
4. Create a VLAN-Backed Transport Zone.mp4
5. Create a VLAN-Backed Segment.mp4
6. Add External Interfaces to T0 Gateway.mp4
7. Configure Virtual IP.mp4
8. Setting up a Default Route .mp4
9. The Route through the Services Router for GW-0.MP4
10. Using Traceflow and Packet Captures to Verify the Traffic Flow.MP4
11. Validation.mp4
12. Validation 2.mp4
9. Use OSPF with NSX 4.x
1. Intro.mp4
2. NSX with OSPF Overview.mp4
3. OSPF with NSX Game Plan.mp4
4. Verify Existing Topology.mp4
5. Configure OSPF on T0 GW.mp4
6. Configure OSPF on External Routers.mp4
7. Advertise Networks via OSPF.mp4
8. Validation.mp4
9. Validation 2.mp4
10. Use BGP with NSX 4.x
1. Intro .mp4
2. IP Routing and BGP Overview.mp4
3. Game Plan for BGP.mp4
4. Confirm Existing IPv4 Topology and Routing.mp4
5. Configure GW-0 for BGP.mp4
6. Configure External Router for BGP.mp4
7. Advertise Routes via BGP From GW-0.mp4
8. Advertise Routes via BGP from External router.mp4
9. Validation.mp4
10. Validation 2.mp4
11. Configure NSX NAT
1. Intro.mp4
2. NAT Overview.mp4
3. Game Plan for NAT.mp4
4. Update Topology.mp4
5. Deploy Test VMs.mp4
6. Configure Source NAT (SNAT) .mp4
7. Test and Verify SNAT.mp4+
8. Configure and verify DNAT.mp4
9. Validation.mp4
10. Validation 2.mp4
12. Use NSX IPv4 DHCP Services
1. Intro.mp4
2. NSX DHCP Services Overview.mp4
3. Game Plan for DHCP Services.mp4
4. Configure DHCP Relay.mp4
5. Verify DHCP Relay.mp4
6. Configure Segment DHCP Services.mp4
7. Verify Segment DHCP Services.mp4
8. Configure and Test GW DHCP Services.mp4
9. Validation .mp4
10. Validation 2.mp4
13. Use NSX Distributed Firewall
1. Intro.mp4
2. Distributed Firewall (DFW) Overview.mp4
3. NSX DFW Game Plan.mp4
4. Deploy Test VMs.mp4
5. Set up DHCP Static Bindings.mp4
6. Create and Assign NSX Tags.mp4
7. Create NSX Groups Using Tags.mp4
8. Create and Test our First DFW Security Policy and Rule.MP4
9. DFW to Deny SSH from Clients to Web Server.mp4
10. DFW to Deny Telnet from Clients to Servers.mp4
11. Validation.mp4
12. Validation 2.mp4
14. Use NSX DFW Context Profiles
1. Intro.mp4
2. Context Profiles Overview.mp4
3. Game Plan for Context Profiles.mp4
4. Verify Existing Topology.mp4
5. Configure and Verify SSH DFW Rule .mp4
6. FQDN Filtering.mp4
7. FQDN Filtering Part 2.mp4
8. Filtering Based on App ID.mp4
9. Validation.mp4
10. Validation Part 2.mp4
15. Use NSX Gateway FW
1. Intro.mp4
2. Gateway Firewall Overview.mp4
3. GW Firewall Game Plan.mp4
4. Verify and Update the Topology.mp4
5. T0 GW Policy for Inbound Traffic.mp4
6. T1 GW Policy .mp4
7. Validation.mp4
8. Validation Part 2.mp4
16. Use NSX Identity FW (IDFW)
1. Intro.mp4
2. Identity FW (IDFW) Overview.mp4
3. Identity FW Game Plan.mp4
4. Confirm Topology.mp4
5. Configure NSX to use Active Directory.mp4
6. Enable IDFW and Create Groups.mp4
7. Create FW Rules using Groups.mp4
8. Validation.mp4
9. Validation Part 2.mp4
17. Use NSX IDS-IPS
1. Intro.mp4
2. IDS IPS Overview.mp4
3. IDS IPS Game Plan.mp4
4. Verify Topology for IDS-IPS.mp4
5. IPS Types of Activity.mp4
6. Enable IDS-IPS and Create a Profile.mp4
7. Create IDS-IPS Policy and Rules.mp4
8. Test and Verify DFW IDS-IPS.mp4
9. Gateway Based IDSIPS.mp4
10. Validation.mp4
11. Solution.mp4
18. Use NSX VRF Lite
1. Intro.mp4
2. VRF Lite Overview.mp4
3. VRF Lite Game Plan.mp4
4. Deploy Parent T0 GW.mp4
5. Deploy Blue VRF T0 GW.mp4
6. Deploy Blue T1 GWs.mp4
7. Add Segments in Blue VRF.mp4
8. Add VMs and NAT.mp4
9. Validation VRF Lite Presentation.mp4
10. Validation VRF Lite Presentation Part 2.mp4
19. Use NSX Segment Profiles
1. Intro .mp4
2. Segment Profiles Overview.mp4
3. QoS Segment Profile.mp4
4. IP Discovery Segment Profile.mp4
5. MAC Discovery Segment Profile.mp4
6. SpoofGuard Segment Profile.mp4
7. Security Segment Profile.mp4
8. Edge Bridge Profiles.mp4
9. Validation.mp4
10. Validation Part 2.mp4
20. Use NSX Federation
1. Intro.mp4
2. NSX Federation Overview.mp4
3. Federation Game Plan.mp4
4. Prep Work on Local NSX Managers.mp4
5. Deploy Global NSX Manager.mp4
6. Onboard Local Managers to the Global Manager.mp4
7. Import Configurations From Managed Sites.mp4
8. Remote Tunnel End Points (RTEPs) for Edge Nodes.mp4
9. Stretched GW and Segment.mp4
10. Validation.mp4
11. Validation Part 2.mp4
21. Use NSX Stretched Topologies
1. Stretched Topologies Overview and Game Plan.mp4
2. Remove Existing Topology.mp4
3. Create External Segments.mp4
4. Create Stretched T0 GW.mp4
5. Create Default Routes and SNAT.mp4
6. Create a Stretched T1 GW and Segment.mp4
7. DHCP Services.mp4
8. Testing Stretched Networking.mp4
9. Validation.mp4
10. Validation Part 2.mp4
22. Use NSX Policy Based IPsec VPNs
1. IPsec Site-to-Site Policy-Based VPN Overview.MP4
2. Game Plan for IPsec.mp4
3. Prepare the T0 Networking.mp4
4. Prepare the External Router.mp4
5. IPsec Configuration on T0.mp4
6. Test and Verify.mp4
7.Validation.mp4
8. Validation Part 2.mp4
23. Use NSX Route-Based IPsec VPNs
1. Intro to NSX Route-Based IPsec VPNs.mp4
2. Overview Route-based IPsec VPNs.mp4
3. Route-based IPsec VPN Game Plan.mp4
4. Verify current Topology.mp4
5. Configure IPsec Session for Site-3.mp4
6. Configure IPsec Session for Site-4.mp4
7. Adding IPv4 Routes.mp4
8. Test and Verify.mp4
9. Validation.mp4
24. Use NSX L2 VPNs
1. Intro L2 VPNs.mp4
2. Overview L2 VPNs.mp4
3. Gameplan for L2 VPNs.mp4
4. Verify and Clean Up the Current Topology.mp4
5. Configure L2 VPN Server.mp4
6. Configure L2 VPN Client.mp4
7. Create Segments for L2 VPN.mp4
8. Testing the L2 VPN.mp4
9. Validation.mp4
10. Validation Part 2.mp4
25. Use the NSX Adv. Load Balancer
1. Adv Load Balancer Overview.mp4
2. Game Plan for ALB.mp4
3. Confirm Current NSX Topology.mp4
4. Deploy the ALB Controller.mp4
5. Create Content Library.mp4
6. ALB License and Credentials.mp4
7. Create NSX Cloud in ALB.mp4
8. Create a Virtual Service.mp4
9. Testing the Advanced Load Balancer.mp4
10. Validation of ALB.mp4
11. Validation of ALB Part 2.mp4
26. Use the NSX ALB with VLANs
1. Overview and Game Plan.mp4
2. Update Topology.mp4
3. Create an NSX Cloud.mp4
4. Create the First Virtual Service.mp4
5. Testing the Virtual Service.mp4
6. Create a Second Virtual Service.mp4
7. Validation.mp4
8. Validation Part 2.mp4
27. Build an NSX 4.x Lab
1. Introduction.mp4
2. Nested Lab Overview.mp4
3. Top of Rack (ToR) Switch and Mgmt. Network.mp4
4. VMs.mp4
5. Nested Networking.mp4
6. Deploying NSX Manager.mp4
7. Adding Host Transport Nodes.mp4
8. Deploy NSX Edges.mp4
9. Test NSX Functionality.mp4
10. Shutdown and Snapshot.mp4
11. Validation .mp4
28. Prep the Net for NAPP
1. Intro.mp4
2. NSX Application Platform Network Preparation Overview.mp4
3. Planning Out the Networking for NAPP.mp4
4. Configuring vSphere.mp4
5. ToR Switch VLANs and IP addressing.mp4
6. Setting Up DHCP.mp4
7. Testing Network Services.mp4
8. Validation.mp4
9. Validation Part 2.mp4
29. Deploy NAPP with Automation VM
1. NSX Application Platform (NAPP) Automation Overview.MP4
2. Deploy the NAPP Automation Appliance VM.mp4
3. Use the NAPP Automation Appliance.mp4
4. Troubleshoot the NAPP Automation.mp4
5. Deploy the NSX Application Platform.mp4
6. Validation.mp4
7. Validation Part 2.mp4
30. Use NSX Intelligence
1. Introduction.mp4
2. NSX Intelligence Overview.mp4
3. Activate NSX Intelligence.mp4
4. Generate Network Traffic.mp4
5. Traffic Visualization and Flow Details.mp4
6. Generate and Use NSX Intelligence Recommendations.mp4
7. Enable Detection of Suspicious Traffic.mp4
8. Validation.mp4
31. Use NSX Network and Malware Detection
1. Introduction.mp4
2. Overview of NSX Malware Prevention.mp4
3. Verify Current Network Functionality.mp4
6. Using Network Detection and Response.mp4
7. Validation.mp4